Allett Buffalo 27". A truly professional machine for the contract grass cutting market. The Allett Buffalo is so outstanding that it was voted "Best Pedestrian Cylinder Mower" and "Best Overall Product" by Amenity Management Magazine. Designed to operate on low engine revs. This is to reduce fuel consumption, noise and vibration levels and wear and tear on the mower, the operator and the enviroment.
FEATURES
Available in two very different specifications
The Buffalo is available in two different specifications. Firstly as a conventional cylinder mower, with full width front roller, rubber covered rear roller and a grassbox. In this specification it produces an excellent striped finish for lawns, golf tees, etc. Secondly as a wheeled machine. Short stub rollers at the front allow longer grass to pass through the cutters and out the back between the rear wheels. In this specification grass up to 200 mm (8inch) in height can be cut.
The Buffalo is available in two different specifications. Firstly as a conventional cylinder mower, with full width front roller, rubber covered rear roller and a grassbox. In this specification it produces an excellent striped finish for lawns, golf tees, etc. Secondly as a wheeled machine. Short stub rollers at the front allow longer grass to pass through the cutters and out the back between the rear wheels. In this specification grass up to 200 mm (8inch) in height can be cut.
Large diameter cutting cylinder
The Buffalo is an extremely rugged mower with a large diameter cutting cylinder giving it the ability to cut long grass even in wet conditions that leave other cylinder mowers in the shed.
The Buffalo is an extremely rugged mower with a large diameter cutting cylinder giving it the ability to cut long grass even in wet conditions that leave other cylinder mowers in the shed.
| Cutting Width | 686mm (27 inch) |
|---|---|
| Overall width | 864mm (34 inch) |
| Weight | 138kg (304lb) |
| Engine | Honda GX160 5.5hp |
| Overall height | 1010mm (40 inch) |
| Overall length | 1280mm (50 inch) |
| Rate of Cut | 66 cuts per metre (60 cuts per yard / 1.66 cuts per inch) |
| Cutting Height | 10mm to 40mm (3/8 inch to 1.5 inch) |
| Cutter Clutch | Handle mounted lever operating tight and loose twin blade V belts via cable (triple belts on 27 inch machines) |
| Cylinder | 6 bladed, all welded, high carbon spring steel, hardened and tempered to 45 HRC and mounted on greaseable bearings |
| Grass Box | Rotationally moulded plastic with steel reinforcing strip |
